A014 Diamond Brite

Diamond Brite (A014) Low Maintenance Wet Look Floor Polish

A thin translucent, easy to use emulsion. No burnishing required. Maximum scuff resistance. Low maintenance requirement. Dries to a wet look gloss. Protects and prolongs the life of flooring materials.

  • Application: For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors.
  • Directions: Must be applied to a clean dry floor. If required strip old polish and allow the floor to dry. Apply a thin even film using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). Additional coats enhance the finish. May be readily maintained with Selsheen or Fastlane. Coverage rate: 60 square metres per litre.
  • N.B. Not suitable for unsealed wood, unsealed cork or laminated flooring.
  • Available Pack Sizes: 5 litres.

Available Pack Sizes

  • 5 litres

Additional Information

» Safety Data Sheet » Information Sheet » Environmental Policy